Binance US

iPhone cannot detect Wi-Fi If you find that iPhone cannot detect Wi-Fi or Binance UScannot connect to the Wi-Fi network, you can consider the following steps to solve this problem. Here are some steps that may help you solve the problem that you can't connect to Wi-Fi. 1. Make sure that the Wi-Fi network is turned on. First, we need to make sure that the Wi-Fi network is turned on correctly. Please check whether your Wi-Fi router is turned on to make sure that your iPhone can receive signals from it. Two. Confirm the Wi-Fi network name and password. If you have confirmed that the Wi-Fi network is turned on but cannot connect, please confirm that your iPhone is trying to connect to the correct Wi-Fi network.You may have tried to connect to the wrong network, or you may have made a mistake when entering the network password. Make sure you have the correct network name and password. 3. Restart the Wi-Fi network. Some Wi-Fi networks need to be restarted to solve connection problems. You can restart the network by turning off the power of the Wi-Fi router and waiting for a while before turning it on again. You can also try to restart the Wi-Fi connection in your iPhone. Open the control center, then turn off Wi-Fi, wait for a while, and turn on Wi-Fi again. When you try to connect to the network, your iPhone will try to connect to other available Wi-Fi networks. Four. Check the Wi-Fi settings of your iPhone to make sure that your iPhone's Wi-Fi settings are turned on. Open "Settings" shouldUse the program, select "Wi-Fi", and then make sure that the Wi-Fi switch is set to "On". If your iPhone shows "Disabled", please turn it on to enable Wi-Fi. 5. Restart your iPhone. If your iPhone still can't connect to Wi-Fi, please try to restart your iPhone. To restart the iPhone, press and hold the side or top button until the "Close" slider appears. Drag the slider to turn off the iPhone. Try to connect to Wi-Fi after startup. 6. Update iPhone software If your iPhone still can't connect to Wi-Fi, you may need to update the software on your iPhone. Open the "Settings" application, select "General", and then select "Software Update". If an update is available, you can choose to download and install the update.7. Reset network settings If you still can't connect to Wi-Fi after updating the iPhone software, you can consider resetting the network settings. Open the "Settings" application, select "General", and then select "Reset". Select "Reset Network Settings", and then wait for the iPhone to reset the network settings to the default settings. Please note that this will clear your Wi-Fi network password and other network settings, so you need to reconnect to Wi-Fi. In short, if your iPhone can't detect the Wi-Fi network, you can try any of the above methods to solve the problem. If these steps do not solve your problem, please consider contacting Apple customer service for more help.

Contact Us
Phone：020-83484680